Power Conditioners Power-Up Technologies: (800) 991-2744

Product Features:

• Rating: 2.5 to 1500KVA arranged in 29 single and three phase voltage families
• Input: Wide range ±10%, -20% with standard Delta/Delta, Delta/Wye, and Wye/Wye three phase designs
• Output: ±1% regulation with no wave from distortion.
• Efficiency: Low impedance design with a typical efficiency of 99%
• Overload: 50% one hour, 1000% 30 cycles
• Harmonics: None added to system
• Power factor load restrictions: None
• Modular design
• Enclosure: Indoor ventilated drip-proof
• 100% front accessibility
• External bypass switch
• Communications: RS-232, RS-422, IEEE-488
• Power conditioners: Isolation output transformer and voltage suppression package

  The AVR voltage regulator and PLC power conditioner product lines consist of over 250 standard units arranged in 29 different voltage families to provide 95% coverage of day-to-day application needs. For ease of application, all units have been KVA rated per the Electrical Industry Equipment Standards for secondary distribution systems. All units are designed to provide ±1% or better output voltage regulation over the entire input voltage range. The complete offering of AVR and PLC products is of a modular design, designed to provide 100% front accessibility for ease of installation, and is enclosed in an indoor ventilated drip-proof enclosure.

  The modular PLC power conditioner consists of a standard AVR, a double shielded output isolation transformer, and a transient voltage suppression package, all enclosed in a single modular enclosure. The type "MP" microprocessor controller is standard on all individual phase controlled (IPC) voltage regulators and power conditioners and is offered as an option on all other units. An external bypass, enclosed in its own indoor ventilated drip-proof enclosure, is available as an option to provide both electrical and mechanical isolation from the regulator or power conditioner for ease of scheduled preventive maintenance

  FirstLine^® Conditioning Power Supply

  30, 40, 65 KW 3-Phase Only

  Introducing A New Kind of Power Conditioner

  The FirstLine Conditioning Power System represents a true innovation in power quality protection. It will protect you from all power disturbances except for complete blackout. It is made with the same technology that runs the most sophisticated UPS (Uninterruptible Power Supply) systems, but with some very important differences. It doesn't require batteries. Batteries have stringent environmental and maintenance requirements, and are only needed for applications that require complete, 100% up-time. The FirstLine uses the same double conversion technology a UPS uses, and protects your equipment from over 98% of all power disturbances. In the U.S., blackouts account for only 2% or less of all power events.

  The FirstLine provides the highest level of electrical protection and precision for your delicate or complex electronics, so that you get the best, most accurate performance from your equipment while reducing the damage that power disturbances can cause, That also lowers your costs for repair and replacement of equipment.

  But what makes the FirstLine truly different is that it brings the high level of power quality protection normally found in the data center to commercial and industrial environments. And, you get this top-quality level of protection for a cost comparable to a tap-changing power conditioner with a lower level of performance.