PowerVerter EMS Inverter/Charger
Reliable Mobile Power Source for Ambulance/EMS Vehicles

$689

• Model #: EMS1250UL

• UL458 / KKK-A-1922 listed
• 12V DC input, 120V AC output
• 2 hospital-grade GFCI outlets; hospital-grade plug
• 2 Anderson DC connectors (1 on the unit and 1 included in the box) for quick battery connection
• 1250 watts continuous output
• Deliver PEAK SURGE output for an EXTENDED period.
• Integrated 3-stage battery chargers
• APSRM$ Remote included

Description:

Description Tripp Lite's EMS1250UL inverter with integrated charging system provides automatic, uninterruptible DC--AC power for critical on-board equipment. Ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades. Supplies up to 1250 watts of continuous 120V AC power t2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected ta shore power source, commercial power passes through tconnected equipment and the battery set is recharged via 3 stage , 55/14 amp selectable charging system. This unit can also function as a UPS system, responding to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Convenient Anderson DC input quick connector on the unit with extra Anderson DC input connector included in the box (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line tbattery power transfer voltages. Includes AC input surge suppression. Includes hospital grade plug and outlets with GFCI (ground fault interrupter) protection. UL458 / KKK-A-1822 listed.

Key Buying Points

• Functions as an emergency vehicle inverter, extended run UPS system or standalone power source
• 1250 watts continuous output power; provides up tto wice this rating for momentary startup of inductive loads
• UL458 / KKK-A-1822 listed
• Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
• 2 hospital-grade, GFCI protected outlets; 3-ft. AC power cord with hospital grade plug; Two 75A rated Anderson DC input connectors (1 on the unit and 1 included in the box) for 12V battery quick connection for use with user-supplied cables
• Converts 12V DC to 120V AC
• Frequency control for operating stability
• Advanced 14/55 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries
• Switch allows user to select between off, auto-invert and charge-only settings
• 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
• Configuration switches allow the user to select the high and low voltage for the unit to automatically transfer from AC power tbattery backup
• Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
• RJ45 port allows connection of remote switch (part# External switch for wired remote control of APS unit (APSRM4) which is included
• Included remote switch can be linked in a daisy chain with a second remote switch (sold separately) for remote operation from multiple locations. Multiple mounting options include access panel mount or below dash. Ignition interlock feature can shut down unit when engine is off, ending worries of accidental battery drain
• Allows unlimited runtime capability by allowing the use of any number of user-supplied wet or gel type batteries (Call for battery pricing)